TY - JOUR AU - Barry, R. AU - Ivanov, D. PY - 2004 DA - 2004// TI - Microfluidics in biotechnology JO - J Nanobiotechnol VL - 2 UR - https://doi.org/10.1186/1477-3155-2-2 DO - 10.1186/1477-3155-2-2 ID - Barry2004 ER - TY - JOUR AU - Dittrich, P. S. AU - Manz, A. PY - 2006 DA - 2006// TI - Lab-on-a-chip: microfluidics in drug discovery JO - Nat Rev Drug Discov VL - 5 UR - https://doi.org/10.1038/nrd1985 DO - 10.1038/nrd1985 ID - Dittrich2006 ER - TY - JOUR AU - Guo, L. AU - Feng, J. AU - Fang, Z. AU - Xu, J. AU - Lu, X. PY - 2015 DA - 2015// TI - Application of microfluidic “lab-on-a-chip” for the detection of mycotoxins in foods JO - Trends Food Sci Technol VL - 46 UR - https://doi.org/10.1016/j.tifs.2015.09.005 DO - 10.1016/j.tifs.2015.09.005 ID - Guo2015 ER - TY - JOUR AU - Weibel, D. B. AU - Whitesides, G. M. PY - 2006 DA - 2006// TI - Applications of microfluidics in chemical biology JO - Curr Opin Chem Biol VL - 10 UR - https://doi.org/10.1016/j.cbpa.2006.10.016 DO - 10.1016/j.cbpa.2006.10.016 ID - Weibel2006 ER - TY - JOUR AU - Whitesides, G. M. PY - 2006 DA - 2006// TI - The origins and the future of microfluidics JO - Nature VL - 442 UR - https://doi.org/10.1038/nature05058 DO - 10.1038/nature05058 ID - Whitesides2006 ER - TY - JOUR AU - Verpoorte, E. PY - 2002 DA - 2002// TI - Microfluidic chips for clinical and forensic analysis JO - Electrophoresis VL - 23 UR - https://doi.org/3.0.CO;2-8 DO - 3.0.CO;2-8 ID - Verpoorte2002 ER - TY - JOUR AU - Benavente-Babace, A. AU - Gallego-Pérez, D. AU - Hansford, D. J. AU - Arana, S. AU - Pérez-Lorenzo, E. AU - Mujika, M. PY - 2014 DA - 2014// TI - Single-cell trapping and selective treatment via co-flow within a microfluidic platform JO - Biosens Bioelectron VL - 61 UR - https://doi.org/10.1016/j.bios.2014.05.036 DO - 10.1016/j.bios.2014.05.036 ID - Benavente-Babace2014 ER - TY - JOUR AU - Holmes, D. AU - Whyte, G. AU - Bailey, J. AU - Vergara-Irigaray, N. AU - Ekpenyong, A. AU - Guck, J. AU - Duke, T. PY - 2014 DA - 2014// TI - Separation of blood cells with differing deformability using deterministic lateral displacement JO - Interface Focus VL - 4 UR - https://doi.org/10.1098/rsfs.2014.0011 DO - 10.1098/rsfs.2014.0011 ID - Holmes2014 ER - TY - JOUR AU - Nge, P. N. AU - Rogers, C. I. AU - Woolley, A. T. PY - 2013 DA - 2013// TI - Advances in microfluidic materials, functions, integration, and applications JO - Chem Rev VL - 113 UR - https://doi.org/10.1021/cr300337x DO - 10.1021/cr300337x ID - Nge2013 ER - TY - JOUR AU - Moltzahn, F. AU - Olshen, A. B. AU - Baehner, L. AU - Peek, A. AU - Fong, L. AU - Stöppler, H. AU - Simko, J. AU - Hilton, J. F. AU - Carroll, P. AU - Blelloch, R. PY - 2011 DA - 2011// TI - Microfluidic-based multiplex qRT-PCR identifies diagnostic and prognostic microRNA signatures in the sera of prostate cancer patients JO - Cancer Res VL - 71 UR - https://doi.org/10.1158/0008-5472.CAN-10-1229 DO - 10.1158/0008-5472.CAN-10-1229 ID - Moltzahn2011 ER - TY - JOUR AU - Kuo, C. -. T. AU - Chiang, C. -. L. AU - Chang, C. -. H. AU - Liu, H. -. K. AU - Huang, G. -. S. AU - Huang, R. Y. -. J. AU - Lee, H. AU - Huang, C. -. S. AU - Wo, A. M. PY - 2014 DA - 2014// TI - Modeling of cancer metastasis and drug resistance via biomimetic nano-cilia and microfluidics JO - Biomaterials VL - 35 UR - https://doi.org/10.1016/j.biomaterials.2013.11.008 DO - 10.1016/j.biomaterials.2013.11.008 ID - Kuo2014 ER - TY - JOUR AU - Novik, E. AU - Maguire, T. J. AU - Chao, P. AU - Cheng, K. AU - Yarmush, M. L. PY - 2010 DA - 2010// TI - A microfluidic hepatic coculture platform for cell-based drug metabolism studies JO - Biochem Pharmacol VL - 79 UR - https://doi.org/10.1016/j.bcp.2009.11.010 DO - 10.1016/j.bcp.2009.11.010 ID - Novik2010 ER - TY - JOUR AU - Dishinger, J. F. AU - Kennedy, R. T. PY - 2007 DA - 2007// TI - Serial immunoassays in parallel on a microfluidic chip for monitoring hormone secretion from living cells JO - Anal Chem VL - 79 UR - https://doi.org/10.1021/ac061425s DO - 10.1021/ac061425s ID - Dishinger2007 ER - TY - JOUR AU - Liu, P. AU - Mathies, R. A. PY - 2009 DA - 2009// TI - Integrated microfluidic systems for high-performance genetic analysis JO - Trends Biotechnol VL - 27 UR - https://doi.org/10.1016/j.tibtech.2009.07.002 DO - 10.1016/j.tibtech.2009.07.002 ID - Liu2009 ER - TY - BOOK AU - Haring, A. P. AU - Sontheimer, H. AU - Johnson, B. N. PY - 2017 DA - 2017// TI - Microphysiological human brain and neural systems-on-a-Chip: potential alternatives to small animal models and emerging platforms for drug discovery and personalized medicine. Stem cell reviews and reports:1–26 ID - Haring2017 ER - TY - JOUR AU - Huh, D. AU - Hamilton, G. A. AU - Ingber, D. E. PY - 2011 DA - 2011// TI - From 3D cell culture to organs-on-chips JO - Trends Cell Biol VL - 21 UR - https://doi.org/10.1016/j.tcb.2011.09.005 DO - 10.1016/j.tcb.2011.09.005 ID - Huh2011 ER - TY - JOUR AU - Huh, D. AU - Matthews, B. D. AU - Mammoto, A. AU - Montoya-Zavala, M. AU - Hsin, H. Y. AU - Ingber, D. E. PY - 2010 DA - 2010// TI - Reconstituting organ-level lung functions on a chip JO - Science VL - 328 UR - https://doi.org/10.1126/science.1188302 DO - 10.1126/science.1188302 ID - Huh2010 ER - TY - JOUR AU - Kimura, H. AU - Yamamoto, T. AU - Sakai, H. AU - Sakai, Y. AU - Fujii, T. PY - 2008 DA - 2008// TI - An integrated microfluidic system for long-term perfusion culture and on-line monitoring of intestinal tissue models JO - Lab Chip VL - 8 UR - https://doi.org/10.1039/b717091b DO - 10.1039/b717091b ID - Kimura2008 ER - TY - JOUR AU - Sackmann, E. K. AU - Fulton, A. L. AU - Beebe, D. J. PY - 2014 DA - 2014// TI - The present and future role of microfluidics in biomedical research JO - Nature VL - 507 UR - https://doi.org/10.1038/nature13118 DO - 10.1038/nature13118 ID - Sackmann2014 ER - TY - JOUR AU - Tsai, M. AU - Kita, A. AU - Leach, J. AU - Rounsevell, R. AU - Huang, J. N. AU - Moake, J. AU - Ware, R. E. AU - Fletcher, D. A. AU - Lam, W. A. PY - 2012 DA - 2012// TI - In vitro modeling of the microvascular occlusion and thrombosis that occur in hematologic diseases using microfluidic technology JO - J Clin Invest VL - 122 UR - https://doi.org/10.1172/JCI58753 DO - 10.1172/JCI58753 ID - Tsai2012 ER - TY - JOUR AU - Hanada, Y. AU - Sugioka, K. AU - Kawano, H. AU - Ishikawa, I. S. AU - Miyawaki, A. AU - Midorikawa, K. PY - 2008 DA - 2008// TI - Nano-aquarium for dynamic observation of living cells fabricated by femtosecond laser direct writing of photostructurable glass JO - Biomed Microdevices VL - 10 UR - https://doi.org/10.1007/s10544-007-9149-0 DO - 10.1007/s10544-007-9149-0 ID - Hanada2008 ER - TY - JOUR AU - Hanada, Y. AU - Sugioka, K. AU - Shihira-Ishikawa, I. AU - Kawano, H. AU - Miyawaki, A. AU - Midorikawa, K. PY - 2011 DA - 2011// TI - 3D microfluidic chips with integrated functional microelements fabricated by a femtosecond laser for studying the gliding mechanism of cyanobacteria JO - Lab Chip VL - 11 UR - https://doi.org/10.1039/c1lc20101h DO - 10.1039/c1lc20101h ID - Hanada2011 ER - TY - JOUR AU - Duffy, D. C. AU - McDonald, J. C. AU - Schueller, O. J. AU - Whitesides, G. M. PY - 1998 DA - 1998// TI - Rapid prototyping of microfluidic systems in poly (dimethylsiloxane) JO - Anal Chem VL - 70 UR - https://doi.org/10.1021/ac980656z DO - 10.1021/ac980656z ID - Duffy1998 ER - TY - JOUR AU - Amin, R. AU - Knowlton, S. AU - Hart, A. AU - Yenilmez, B. AU - Ghaderinezhad, F. AU - Katebifar, S. AU - Messina, M. AU - Khademhosseini, A. AU - Tasoglu, S. PY - 2016 DA - 2016// TI - 3D-printed microfluidic devices JO - Biofabrication VL - 8 UR - https://doi.org/10.1088/1758-5090/8/2/022001 DO - 10.1088/1758-5090/8/2/022001 ID - Amin2016 ER - TY - BOOK AU - Au, A. K. AU - Huynh, W. AU - Horowitz, L. F. AU - Folch, A. PY - 2016 DA - 2016// TI - 3D–printed microfluidics. Angewandte Chemie International Edition ID - Au2016 ER - TY - JOUR AU - Tseng, P. AU - Murray, C. AU - Kim, D. AU - Di Carlo, D. PY - 2014 DA - 2014// TI - Research highlights: printing the future of microfabrication JO - Lab Chip VL - 14 UR - https://doi.org/10.1039/c4lc90023e DO - 10.1039/c4lc90023e ID - Tseng2014 ER - TY - JOUR AU - Rogers, C. I. AU - Qaderi, K. AU - Woolley, A. T. AU - Nordin, G. P. PY - 2015 DA - 2015// TI - 3D printed microfluidic devices with integrated valves JO - Biomicrofluidics VL - 9 UR - https://doi.org/10.1063/1.4905840 DO - 10.1063/1.4905840 ID - Rogers2015 ER - TY - JOUR AU - Fuard, D. AU - Tzvetkova-Chevolleau, T. AU - Decossas, S. AU - Tracqui, P. AU - Schiavone, P. PY - 2008 DA - 2008// TI - Optimization of poly-di-methyl-siloxane (PDMS) substrates for studying cellular adhesion and motility JO - Microelectron Eng VL - 85 UR - https://doi.org/10.1016/j.mee.2008.02.004 DO - 10.1016/j.mee.2008.02.004 ID - Fuard2008 ER - TY - JOUR AU - McDonald, J. C. AU - Whitesides, G. M. PY - 2002 DA - 2002// TI - Poly (dimethylsiloxane) as a material for fabricating microfluidic devices JO - Acc Chem Res VL - 35 UR - https://doi.org/10.1021/ar010110q DO - 10.1021/ar010110q ID - McDonald2002 ER - TY - JOUR AU - Zhang, Q. AU - Austin, R. H. PY - 2012 DA - 2012// TI - Applications of microfluidics in stem cell biology JO - BioNanoScience VL - 2 UR - https://doi.org/10.1007/s12668-012-0051-8 DO - 10.1007/s12668-012-0051-8 ID - Zhang2012 ER - TY - STD TI - Folch A. Introduction to bioMEMS: CRC Press; 2016. ID - ref31 ER - TY - JOUR AU - Au, A. K. AU - Huynh, W. AU - Horowitz, L. F. AU - Folch, A. PY - 2016 DA - 2016// TI - 3D-printed microfluidics JO - Angew Chem Int Ed VL - 55 UR - https://doi.org/10.1002/anie.201504382 DO - 10.1002/anie.201504382 ID - Au2016 ER - TY - JOUR AU - Macdonald, N. P. AU - Zhu, F. AU - Hall, C. AU - Reboud, J. AU - Crosier, P. AU - Patton, E. AU - Wlodkowic, D. AU - Cooper, J. PY - 2016 DA - 2016// TI - Assessment of biocompatibility of 3D printed photopolymers using zebrafish embryo toxicity assays JO - Lab Chip VL - 16 UR - https://doi.org/10.1039/C5LC01374G DO - 10.1039/C5LC01374G ID - Macdonald2016 ER - TY - JOUR AU - Lee, K. Y. AU - Mooney, D. J. PY - 2001 DA - 2001// TI - Hydrogels for tissue engineering JO - Chem Rev VL - 101 UR - https://doi.org/10.1021/cr000108x DO - 10.1021/cr000108x ID - Lee2001 ER - TY - JOUR AU - Murphy, S. V. AU - Atala, A. PY - 2014 DA - 2014// TI - 3D bioprinting of tissues and organs JO - Nat Biotechnol VL - 32 UR - https://doi.org/10.1038/nbt.2958 DO - 10.1038/nbt.2958 ID - Murphy2014 ER - TY - JOUR AU - Ling, Y. AU - Rubin, J. AU - Deng, Y. AU - Huang, C. AU - Demirci, U. AU - Karp, J. M. AU - Khademhosseini, A. PY - 2007 DA - 2007// TI - A cell-laden microfluidic hydrogel JO - Lab Chip VL - 7 UR - https://doi.org/10.1039/b615486g DO - 10.1039/b615486g ID - Ling2007 ER - TY - JOUR AU - Bertassoni, L. E. AU - Cecconi, M. AU - Manoharan, V. AU - Nikkhah, M. AU - Hjortnaes, J. AU - Cristino, A. L. AU - Barabaschi, G. AU - Demarchi, D. AU - Dokmeci, M. R. AU - Yang, Y. PY - 2014 DA - 2014// TI - Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs JO - Lab Chip VL - 14 UR - https://doi.org/10.1039/C4LC00030G DO - 10.1039/C4LC00030G ID - Bertassoni2014 ER - TY - JOUR AU - Stanton, M. AU - Samitier, J. AU - Sánchez, S. PY - 2015 DA - 2015// TI - Bioprinting of 3D hydrogels JO - Lab Chip VL - 15 UR - https://doi.org/10.1039/C5LC90069G DO - 10.1039/C5LC90069G ID - Stanton2015 ER - TY - JOUR AU - Au, A. K. AU - Lee, W. AU - Folch, A. PY - 2014 DA - 2014// TI - Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices JO - Lab Chip VL - 14 UR - https://doi.org/10.1039/C3LC51360B DO - 10.1039/C3LC51360B ID - Au2014 ER - TY - JOUR AU - Gowers, S. A. AU - Curto, V. F. AU - Seneci, C. A. AU - Wang, C. AU - Anastasova, S. AU - Vadgama, P. AU - Yang, G. -. Z. AU - Boutelle, M. G. PY - 2015 DA - 2015// TI - 3D printed microfluidic device with integrated biosensors for online analysis of subcutaneous human microdialysate JO - Anal Chem VL - 87 UR - https://doi.org/10.1021/acs.analchem.5b01353 DO - 10.1021/acs.analchem.5b01353 ID - Gowers2015 ER - TY - JOUR AU - Comina, G. AU - Suska, A. AU - Filippini, D. PY - 2014 DA - 2014// TI - PDMS lab-on-a-chip fabrication using 3D printed templates JO - Lab Chip VL - 14 UR - https://doi.org/10.1039/C3LC50956G DO - 10.1039/C3LC50956G ID - Comina2014 ER - TY - JOUR AU - Lee, J. M. AU - Zhang, M. AU - Yeong, W. Y. PY - 2016 DA - 2016// TI - Characterization and evaluation of 3D printed microfluidic chip for cell processing JO - Microfluid Nanofluid VL - 20 UR - https://doi.org/10.1007/s10404-015-1688-8 DO - 10.1007/s10404-015-1688-8 ID - Lee2016 ER - TY - JOUR AU - Hwang, Y. AU - Paydar, O. H. AU - Candler, R. N. PY - 2015 DA - 2015// TI - 3D printed molds for non-planar PDMS microfluidic channels JO - Sensors Actuators A Phys VL - 226 UR - https://doi.org/10.1016/j.sna.2015.02.028 DO - 10.1016/j.sna.2015.02.028 ID - Hwang2015 ER - TY - JOUR AU - Song, S. -. H. AU - Lee, C. -. K. AU - Kim, T. -. J. AU - Shin, I. -. C. AU - Jun, S. -. C. AU - Jung, H. -. I. PY - 2010 DA - 2010// TI - A rapid and simple fabrication method for 3-dimensional circular microfluidic channel using metal wire removal process JO - Microfluid Nanofluid VL - 9 UR - https://doi.org/10.1007/s10404-010-0570-y DO - 10.1007/s10404-010-0570-y ID - Song2010 ER - TY - JOUR AU - Verma, M. K. AU - Majumder, A. AU - Ghatak, A. PY - 2006 DA - 2006// TI - Embedded template-assisted fabrication of complex microchannels in PDMS and design of a microfluidic adhesive JO - Langmuir VL - 22 UR - https://doi.org/10.1021/la062516n DO - 10.1021/la062516n ID - Verma2006 ER - TY - JOUR AU - Bellan, L. M. AU - Singh, S. P. AU - Henderson, P. W. AU - Porri, T. J. AU - Craighead, H. G. AU - Spector, J. A. PY - 2009 DA - 2009// TI - Fabrication of an artificial 3-dimensional vascular network using sacrificial sugar structures JO - Soft Matter VL - 5 UR - https://doi.org/10.1039/b819905a DO - 10.1039/b819905a ID - Bellan2009 ER - TY - JOUR AU - Lee, J. AU - Paek, J. AU - Kim, J. PY - 2012 DA - 2012// TI - Sucrose-based fabrication of 3D-networked, cylindrical microfluidic channels for rapid prototyping of lab-on-a-chip and vaso-mimetic devices JO - Lab Chip VL - 12 UR - https://doi.org/10.1039/c2lc40267j DO - 10.1039/c2lc40267j ID - Lee2012 ER - TY - JOUR AU - Miller, J. S. AU - Stevens, K. R. AU - Yang, M. T. AU - Baker, B. M. AU - Nguyen, D. -. H. T. AU - Cohen, D. M. AU - Toro, E. AU - Chen, A. A. AU - Galie, P. A. AU - Yu, X. PY - 2012 DA - 2012// TI - Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues JO - Nat Mater VL - 11 UR - https://doi.org/10.1038/nmat3357 DO - 10.1038/nmat3357 ID - Miller2012 ER - TY - JOUR AU - Yang, J. AU - Li, K. AU - Zhu, L. AU - Tang, W. PY - 2017 DA - 2017// TI - Fabrication of PDMS microfluidic devices with 3D wax jetting JO - RSC Adv VL - 7 UR - https://doi.org/10.1039/C6RA25765H DO - 10.1039/C6RA25765H ID - Yang2017 ER - TY - JOUR AU - Hansen, C. J. AU - Wu, W. AU - Toohey, K. S. AU - Sottos, N. R. AU - White, S. R. AU - Lewis, J. A. PY - 2009 DA - 2009// TI - Self-healing materials with interpenetrating microvascular networks JO - Adv Mater VL - 21 UR - https://doi.org/10.1002/adma.200900588 DO - 10.1002/adma.200900588 ID - Hansen2009 ER - TY - JOUR AU - Therriault, D. AU - White, S. R. AU - Lewis, J. A. PY - 2003 DA - 2003// TI - Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly JO - Nat Mater VL - 2 UR - https://doi.org/10.1038/nmat863 DO - 10.1038/nmat863 ID - Therriault2003 ER - TY - JOUR AU - Wu, W. AU - Hansen, C. J. AU - Aragón, A. M. AU - Geubelle, P. H. AU - White, S. R. AU - Lewis, J. A. PY - 2010 DA - 2010// TI - Direct-write assembly of biomimetic microvascular networks for efficient fluid transport JO - Soft Matter VL - 6 UR - https://doi.org/10.1039/B918436H DO - 10.1039/B918436H ID - Wu2010 ER - TY - JOUR AU - Wu, W. AU - DeConinck, A. AU - Lewis, J. A. PY - 2011 DA - 2011// TI - Omnidirectional printing of 3D microvascular networks JO - Adv Mater VL - 23 UR - https://doi.org/10.1002/adma.201004625 DO - 10.1002/adma.201004625 ID - Wu2011 ER - TY - JOUR AU - Schwartz, M. A. AU - Chen, C. S. PY - 2013 DA - 2013// TI - Deconstructing dimensionality JO - Science VL - 339 UR - https://doi.org/10.1126/science.1233814 DO - 10.1126/science.1233814 ID - Schwartz2013 ER - TY - JOUR AU - Boland, T. AU - Xu, T. AU - Damon, B. AU - Cui, X. PY - 2006 DA - 2006// TI - Application of inkjet printing to tissue engineering JO - Biotechnol J VL - 1 UR - https://doi.org/10.1002/biot.200600081 DO - 10.1002/biot.200600081 ID - Boland2006 ER - TY - JOUR AU - Nakamura, M. AU - Kobayashi, A. AU - Takagi, F. AU - Watanabe, A. AU - Hiruma, Y. AU - Ohuchi, K. AU - Iwasaki, Y. AU - Horie, M. AU - Morita, I. AU - Takatani, S. PY - 2005 DA - 2005// TI - Biocompatible inkjet printing technique for designed seeding of individual living cells JO - Tissue Eng VL - 11 UR - https://doi.org/10.1089/ten.2005.11.1658 DO - 10.1089/ten.2005.11.1658 ID - Nakamura2005 ER - TY - JOUR AU - Zein, I. AU - Hutmacher, D. W. AU - Tan, K. C. AU - Teoh, S. H. PY - 2002 DA - 2002// TI - Fused deposition modeling of novel scaffold architectures for tissue engineering applications JO - Biomaterials VL - 23 UR - https://doi.org/10.1016/S0142-9612(01)00232-0 DO - 10.1016/S0142-9612(01)00232-0 ID - Zein2002 ER - TY - JOUR AU - Chisti, Y. PY - 2001 DA - 2001// TI - Hydrodynamic damage to animal cells JO - Crit Rev Biotechnol VL - 21 UR - https://doi.org/10.1080/20013891081692 DO - 10.1080/20013891081692 ID - Chisti2001 ER - TY - JOUR AU - Sechi, D. AU - Greer, B. AU - Johnson, J. AU - Hashemi, N. PY - 2013 DA - 2013// TI - Three-dimensional paper-based microfluidic device for assays of protein and glucose in urine JO - Anal Chem VL - 85 UR - https://doi.org/10.1021/ac4014868 DO - 10.1021/ac4014868 ID - Sechi2013 ER - TY - JOUR AU - Thomas, M. S. AU - Millare, B. AU - Clift, J. M. AU - Bao, D. AU - Hong, C. AU - Vullev, V. I. PY - 2010 DA - 2010// TI - Print-and-peel fabrication for microfluidics: what’s in it for biomedical applications? JO - Ann Biomed Eng VL - 38 UR - https://doi.org/10.1007/s10439-009-9831-x DO - 10.1007/s10439-009-9831-x ID - Thomas2010 ER - TY - JOUR AU - Erkal, J. L. AU - Selimovic, A. AU - Gross, B. C. AU - Lockwood, S. Y. AU - Walton, E. L. AU - McNamara, S. AU - Martin, R. S. AU - Spence, D. M. PY - 2014 DA - 2014// TI - 3D printed microfluidic devices with integrated versatile and reusable electrodes JO - Lab Chip VL - 14 UR - https://doi.org/10.1039/C4LC00171K DO - 10.1039/C4LC00171K ID - Erkal2014 ER - TY - JOUR AU - Kitson, P. J. AU - Rosnes, M. H. AU - Sans, V. AU - Dragone, V. AU - Cronin, L. PY - 2012 DA - 2012// TI - Configurable 3D-printed millifluidic and microfluidic ‘lab on a chip’reactionware devices JO - Lab Chip VL - 12 UR - https://doi.org/10.1039/c2lc40761b DO - 10.1039/c2lc40761b ID - Kitson2012 ER - TY - JOUR AU - Chiu, D. T. AU - Jeon, N. L. AU - Huang, S. AU - Kane, R. S. AU - Wargo, C. J. AU - Choi, I. S. AU - Ingber, D. E. AU - Whitesides, G. M. PY - 2000 DA - 2000// TI - Patterned deposition of cells and proteins onto surfaces by using three-dimensional microfluidic systems JO - Proc Natl Acad Sci VL - 97 UR - https://doi.org/10.1073/pnas.040562297 DO - 10.1073/pnas.040562297 ID - Chiu2000 ER - TY - JOUR AU - El-Ali, J. AU - Sorger, P. K. AU - Jensen, K. F. PY - 2006 DA - 2006// TI - Cells on chips JO - Nature VL - 442 UR - https://doi.org/10.1038/nature05063 DO - 10.1038/nature05063 ID - El-Ali2006 ER - TY - JOUR AU - Kamei, K. PY - 2013 DA - 2013// TI - Cutting-edge microfabricated biomedical tools for human pluripotent stem cell research JO - J Lab Automation VL - 18 UR - https://doi.org/10.1177/2211068213495394 DO - 10.1177/2211068213495394 ID - Kamei2013 ER - TY - JOUR AU - Kim, D. -. H. AU - Beebe, D. J. AU - Levchenko, A. PY - 2011 DA - 2011// TI - Micro-and nanoengineering for stem cell biology: the promise with a caution JO - Trends Biotechnol VL - 29 UR - https://doi.org/10.1016/j.tibtech.2011.03.006 DO - 10.1016/j.tibtech.2011.03.006 ID - Kim2011 ER - TY - JOUR AU - Kamei, K. AU - Mashimo, Y. AU - Koyama, Y. AU - Fockenberg, C. AU - Nakashima, M. AU - Nakajima, M. AU - Li, J. AU - Chen, Y. PY - 2015 DA - 2015// TI - 3D printing of soft lithography mold for rapid production of polydimethylsiloxane-based microfluidic devices for cell stimulation with concentration gradients JO - Biomed Microdevices VL - 17 UR - https://doi.org/10.1007/s10544-015-9928-y DO - 10.1007/s10544-015-9928-y ID - Kamei2015 ER - TY - JOUR AU - Connell, J. L. AU - Ritschdorff, E. T. AU - Whiteley, M. AU - Shear, J. B. PY - 2013 DA - 2013// TI - 3D printing of microscopic bacterial communities JO - Proc Natl Acad Sci VL - 110 UR - https://doi.org/10.1073/pnas.1309729110 DO - 10.1073/pnas.1309729110 ID - Connell2013 ER - TY - JOUR AU - Leonard, P. AU - Hearty, S. AU - Brennan, J. AU - Dunne, L. AU - Quinn, J. AU - Chakraborty, T. AU - O’Kennedy, R. PY - 2003 DA - 2003// TI - Advances in biosensors for detection of pathogens in food and water JO - Enzym Microb Technol VL - 32 UR - https://doi.org/10.1016/S0141-0229(02)00232-6 DO - 10.1016/S0141-0229(02)00232-6 ID - Leonard2003 ER - TY - JOUR AU - Lee, W. AU - Kwon, D. AU - Choi, W. AU - Jung, G. Y. AU - Au, A. K. AU - Folch, A. AU - Jeon, S. PY - 2015 DA - 2015// TI - 3D-printed microfluidic device for the detection of pathogenic bacteria using size-based separation in helical channel with trapezoid cross-section JO - Sci Rep VL - 5 UR - https://doi.org/10.1038/srep07717 DO - 10.1038/srep07717 ID - Lee2015 ER - TY - JOUR AU - White, S. R. AU - Sottos, N. AU - Geubelle, P. AU - Moore, J. AU - Kessler, M. R. AU - Sriram, S. AU - Brown, E. AU - Viswanathan, S. PY - 2001 DA - 2001// TI - Autonomic healing of polymer composites JO - Nature VL - 409 UR - https://doi.org/10.1038/35057232 DO - 10.1038/35057232 ID - White2001 ER - TY - JOUR AU - Borenstein, J. T. AU - Weinberg, E. J. AU - Orrick, B. K. AU - Sundback, C. AU - Kaazempur-Mofrad, M. R. AU - Vacanti, J. P. PY - 2007 DA - 2007// TI - Microfabrication of three-dimensional engineered scaffolds JO - Tissue Eng VL - 13 UR - https://doi.org/10.1089/ten.2006.0156 DO - 10.1089/ten.2006.0156 ID - Borenstein2007 ER - TY - JOUR AU - Norotte, C. AU - Marga, F. S. AU - Niklason, L. E. AU - Forgacs, G. PY - 2009 DA - 2009// TI - Scaffold-free vascular tissue engineering using bioprinting JO - Biomaterials VL - 30 UR - https://doi.org/10.1016/j.biomaterials.2009.06.034 DO - 10.1016/j.biomaterials.2009.06.034 ID - Norotte2009 ER - TY - JOUR AU - Williamson, A. AU - Singh, S. AU - Fernekorn, U. AU - Schober, A. PY - 2013 DA - 2013// TI - The future of the patient-specific body-on-a-chip JO - Lab Chip VL - 13 UR - https://doi.org/10.1039/c3lc50237f DO - 10.1039/c3lc50237f ID - Williamson2013 ER - TY - JOUR AU - Wheeler, T. D. AU - Stroock, A. D. PY - 2008 DA - 2008// TI - The transpiration of water at negative pressures in a synthetic tree JO - Nature VL - 455 UR - https://doi.org/10.1038/nature07226 DO - 10.1038/nature07226 ID - Wheeler2008 ER - TY - JOUR AU - Toohey, K. S. AU - Hansen, C. J. AU - Lewis, J. A. AU - White, S. R. AU - Sottos, N. R. PY - 2009 DA - 2009// TI - Delivery of two-part self-healing chemistry via microvascular networks JO - Adv Funct Mater VL - 19 UR - https://doi.org/10.1002/adfm.200801824 DO - 10.1002/adfm.200801824 ID - Toohey2009 ER - TY - JOUR AU - Kaully, T. AU - Kaufman-Francis, K. AU - Lesman, A. AU - Levenberg, S. PY - 2009 DA - 2009// TI - Vascularization—the conduit to viable engineered tissues JO - Tissue Eng B Rev VL - 15 UR - https://doi.org/10.1089/ten.teb.2008.0193 DO - 10.1089/ten.teb.2008.0193 ID - Kaully2009 ER - TY - JOUR AU - Du, Y. AU - Lo, E. AU - Ali, S. AU - Khademhosseini, A. PY - 2008 DA - 2008// TI - Directed assembly of cell-laden microgels for fabrication of 3D tissue constructs JO - Proc Natl Acad Sci VL - 105 UR - https://doi.org/10.1073/pnas.0801866105 DO - 10.1073/pnas.0801866105 ID - Du2008 ER - TY - JOUR AU - Khademhosseini, A. AU - Langer, R. AU - Borenstein, J. AU - Vacanti, J. P. PY - 2006 DA - 2006// TI - Microscale technologies for tissue engineering and biology JO - Proc Natl Acad Sci U S A VL - 103 UR - https://doi.org/10.1073/pnas.0507681102 DO - 10.1073/pnas.0507681102 ID - Khademhosseini2006 ER - TY - JOUR AU - Paul, A. AU - Hasan, A. AU - Rodes, L. AU - Sangaralingam, M. AU - Prakash, S. PY - 2014 DA - 2014// TI - Bioengineered baculoviruses as new class of therapeutics using micro and nanotechnologies: principles, prospects and challenges JO - Adv Drug Deliv Rev VL - 71 UR - https://doi.org/10.1016/j.addr.2014.01.004 DO - 10.1016/j.addr.2014.01.004 ID - Paul2014 ER - TY - JOUR AU - Choi, N. W. AU - Cabodi, M. AU - Held, B. AU - Gleghorn, J. P. AU - Bonassar, L. J. AU - Stroock, A. D. PY - 2007 DA - 2007// TI - Microfluidic scaffolds for tissue engineering JO - Nat Mater VL - 6 UR - https://doi.org/10.1038/nmat2022 DO - 10.1038/nmat2022 ID - Choi2007 ER - TY - JOUR AU - Park, J. H. AU - Chung, B. G. AU - Lee, W. G. AU - Kim, J. AU - Brigham, M. D. AU - Shim, J. AU - Lee, S. AU - Hwang, C. M. AU - Durmus, N. G. AU - Demirci, U. PY - 2010 DA - 2010// TI - Microporous cell-laden hydrogels for engineered tissue constructs JO - Biotechnol Bioeng VL - 106 ID - Park2010 ER - TY - STD TI - Bae H, Puranik AS, Gauvin R, Edalat F, Carrillo-Conde B, Peppas NA, Khademhosseini A. Building vascular networks. Sci Transl Med. 2012;4(160):160ps123–3. ID - ref83 ER - TY - JOUR AU - Folkman, J. PY - 1995 DA - 1995// TI - Angiogenesis in cancer, vascular, rheumatoid and other disease JO - Nat Med VL - 1 UR - https://doi.org/10.1038/nm0195-27 DO - 10.1038/nm0195-27 ID - Folkman1995 ER - TY - JOUR AU - Lee, V. K. AU - Kim, D. Y. AU - Ngo, H. AU - Lee, Y. AU - Seo, L. AU - Yoo, S. -. S. AU - Vincent, P. A. AU - Dai, G. PY - 2014 DA - 2014// TI - Creating perfused functional vascular channels using 3D bio-printing technology JO - Biomaterials VL - 35 UR - https://doi.org/10.1016/j.biomaterials.2014.05.083 DO - 10.1016/j.biomaterials.2014.05.083 ID - Lee2014 ER - TY - JOUR AU - Attalla, R. AU - Ling, C. AU - Selvaganapathy, P. PY - 2016 DA - 2016// TI - Fabrication and characterization of gels with integrated channels using 3D printing with microfluidic nozzle for tissue engineering applications JO - Biomed Microdevices VL - 18 UR - https://doi.org/10.1007/s10544-016-0042-6 DO - 10.1007/s10544-016-0042-6 ID - Attalla2016 ER - TY - JOUR AU - Hong, S. AU - Sycks, D. AU - Chan, H. F. AU - Lin, S. AU - Lopez, G. P. AU - Guilak, F. AU - Leong, K. W. AU - Zhao, X. PY - 2015 DA - 2015// TI - 3D printing of highly stretchable and tough hydrogels into complex, cellularized structures JO - Adv Mater VL - 27 UR - https://doi.org/10.1002/adma.201501099 DO - 10.1002/adma.201501099 ID - Hong2015 ER - TY - JOUR AU - Colosi, C. AU - Shin, S. R. AU - Manoharan, V. AU - Massa, S. AU - Costantini, M. AU - Barbetta, A. AU - Dokmeci, M. R. AU - Dentini, M. AU - Khademhosseini, A. PY - 2016 DA - 2016// TI - Microfluidic bioprinting of heterogeneous 3D tissue constructs using low-viscosity bioink JO - Adv Mater VL - 28 UR - https://doi.org/10.1002/adma.201503310 DO - 10.1002/adma.201503310 ID - Colosi2016 ER - TY - STD TI - Knowlton S, Joshi A, Yenilmez B, Ozbolat IT, Chua CK, Khademhosseini A, Tasoglu S. Advancing cancer research using bioprinting for tumor-on-a-chip platforms. Int J Bioprinting. 2016;2(2) ID - ref89 ER - TY - JOUR AU - Zhao, Y. AU - Yao, R. AU - Ouyang, L. AU - Ding, H. AU - Zhang, T. AU - Zhang, K. AU - Cheng, S. AU - Sun, W. PY - 2014 DA - 2014// TI - Three-dimensional printing of Hela cells for cervical tumor model in vitro JO - Biofabrication VL - 6 UR - https://doi.org/10.1088/1758-5082/6/3/035001 DO - 10.1088/1758-5082/6/3/035001 ID - Zhao2014 ER - TY - JOUR AU - Knowlton, S. AU - Onal, S. AU - Yu, C. H. AU - Zhao, J. J. AU - Tasoglu, S. PY - 2015 DA - 2015// TI - Bioprinting for cancer research JO - Trends Biotechnol VL - 33 UR - https://doi.org/10.1016/j.tibtech.2015.06.007 DO - 10.1016/j.tibtech.2015.06.007 ID - Knowlton2015 ER - TY - JOUR AU - Bhise, N. S. AU - Manoharan, V. AU - Massa, S. AU - Tamayol, A. AU - Ghaderi, M. AU - Miscuglio, M. AU - Lang, Q. AU - Zhang, Y. S. AU - Shin, S. R. AU - Calzone, G. PY - 2016 DA - 2016// TI - A liver-on-a-chip platform with bioprinted hepatic spheroids JO - Biofabrication VL - 8 UR - https://doi.org/10.1088/1758-5090/8/1/014101 DO - 10.1088/1758-5090/8/1/014101 ID - Bhise2016 ER - TY - JOUR AU - Knowlton, S. AU - Yenilmez, B. AU - Tasoglu, S. PY - 2016 DA - 2016// TI - Towards single-step biofabrication of organs on a chip via 3D printing JO - Trends Biotechnol VL - 34 UR - https://doi.org/10.1016/j.tibtech.2016.06.005 DO - 10.1016/j.tibtech.2016.06.005 ID - Knowlton2016 ER - TY - JOUR AU - Singh, M. AU - Tong, Y. AU - Webster, K. AU - Cesewski, E. AU - Haring, A. P. AU - Laheri, S. AU - Carswell, B. AU - O'Brien, T. J. AU - Aardema, C. H. AU - Senger, R. S. PY - 2017 DA - 2017// TI - 3D printed conformal microfluidics for isolation and profiling of biomarkers from whole organs JO - Lab Chip VL - 17 UR - https://doi.org/10.1039/C7LC00468K DO - 10.1039/C7LC00468K ID - Singh2017 ER - TY - JOUR AU - Illg, T. AU - Löb, P. AU - Hessel, V. PY - 2010 DA - 2010// TI - Flow chemistry using milli-and microstructured reactors—from conventional to novel process windows JO - Bioorg Med Chem VL - 18 UR - https://doi.org/10.1016/j.bmc.2010.03.073 DO - 10.1016/j.bmc.2010.03.073 ID - Illg2010 ER - TY - JOUR AU - Kitson, P. J. AU - Glatzel, S. AU - Chen, W. AU - Lin, C. -. G. AU - Song, Y. -. F. AU - Cronin, L. PY - 2016 DA - 2016// TI - 3D printing of versatile reactionware for chemical synthesis JO - Nat Protoc VL - 11 UR - https://doi.org/10.1038/nprot.2016.041 DO - 10.1038/nprot.2016.041 ID - Kitson2016 ER - TY - BOOK AU - Okafor, O. AU - Weilhard, A. AU - Fernandes, J. A. AU - Karjalainen, E. AU - Goodridge, R. AU - Sans, V. PY - 2017 DA - 2017// TI - Advanced reactor engineering with 3D printing for the continuous-flow synthesis of silver nanoparticles. Reaction Chemistry & Engineering ID - Okafor2017 ER - TY - JOUR AU - Ho, C. M. B. AU - Ng, S. H. AU - Li, K. H. H. AU - Yoon, Y. -. J. PY - 2015 DA - 2015// TI - 3D printed microfluidics for biological applications JO - Lab Chip VL - 15 UR - https://doi.org/10.1039/C5LC00685F DO - 10.1039/C5LC00685F ID - Ho2015 ER - TY - STD TI - Zavorotnitsienko D. Understanding 3D printer quality & resolution. http://ilios3d.com/en/product-documentation/ilios-documentation-3dprint-quality UR - http://ilios3d.com/en/product-documentation/ilios-documentation-3dprint-quality ID - ref99 ER - TY - JOUR AU - Bhargava, K. C. AU - Thompson, B. AU - Malmstadt, N. PY - 2014 DA - 2014// TI - Discrete elements for 3D microfluidics JO - Proc Natl Acad Sci VL - 111 UR - https://doi.org/10.1073/pnas.1414764111 DO - 10.1073/pnas.1414764111 ID - Bhargava2014 ER - TY - JOUR AU - Tumbleston, J. R. AU - Shirvanyants, D. AU - Ermoshkin, N. AU - Janusziewicz, R. AU - Johnson, A. R. AU - Kelly, D. AU - Chen, K. AU - Pinschmidt, R. AU - Rolland, J. P. AU - Ermoshkin, A. PY - 2015 DA - 2015// TI - Continuous liquid interface production of 3D objects JO - Science VL - 347 UR - https://doi.org/10.1126/science.aaa2397 DO - 10.1126/science.aaa2397 ID - Tumbleston2015 ER - TY - JOUR AU - Yazdi, A. A. AU - Popma, A. AU - Wong, W. AU - Nguyen, T. AU - Pan, Y. AU - Xu, J. PY - 2016 DA - 2016// TI - 3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications JO - Microfluid Nanofluid VL - 20 UR - https://doi.org/10.1007/s10404-016-1715-4 DO - 10.1007/s10404-016-1715-4 ID - Yazdi2016 ER - TY - JOUR AU - Tsuda, S. AU - Jaffery, H. AU - Doran, D. AU - Hezwani, M. AU - Robbins, P. J. AU - Yoshida, M. AU - Cronin, L. PY - 2015 DA - 2015// TI - Customizable 3D printed ‘plug and play’millifluidic devices for programmable fluidics JO - PLoS One VL - 10 UR - https://doi.org/10.1371/journal.pone.0141640 DO - 10.1371/journal.pone.0141640 ID - Tsuda2015 ER - TY - JOUR AU - Meng, Z. -. J. AU - Wang, W. AU - Liang, X. AU - Zheng, W. -. C. AU - Deng, N. -. N. AU - Xie, R. AU - Ju, X. -. J. AU - Liu, Z. AU - Chu, L. -. Y. PY - 2015 DA - 2015// TI - Plug-n-play microfluidic systems from flexible assembly of glass-based flow-control modules JO - Lab Chip VL - 15 UR - https://doi.org/10.1039/C5LC00132C DO - 10.1039/C5LC00132C ID - Meng2015 ER - TY - JOUR AU - Gong, H. AU - Woolley, A. T. AU - Nordin, G. P. PY - 2016 DA - 2016// TI - High density 3D printed microfluidic valves, pumps, and multiplexers JO - Lab Chip VL - 16 UR - https://doi.org/10.1039/C6LC00565A DO - 10.1039/C6LC00565A ID - Gong2016 ER - TY - JOUR AU - Waheed, S. AU - Cabot, J. M. AU - Macdonald, N. P. AU - Lewis, T. AU - Guijt, R. M. AU - Paull, B. AU - Breadmore, M. C. PY - 2016 DA - 2016// TI - 3D printed microfluidic devices: enablers and barriers JO - Lab Chip VL - 16 UR - https://doi.org/10.1039/C6LC00284F DO - 10.1039/C6LC00284F ID - Waheed2016 ER - TY - JOUR AU - Bhattacharjee, N. AU - Urrios, A. AU - Kang, S. AU - Folch, A. PY - 2016 DA - 2016// TI - The upcoming 3D-printing revolution in microfluidics JO - Lab Chip VL - 16 UR - https://doi.org/10.1039/C6LC00163G DO - 10.1039/C6LC00163G ID - Bhattacharjee2016 ER - TY - JOUR AU - O'Neill, P. AU - Ben, A. A. AU - Vázquez, M. AU - Liu, J. AU - Marczak, S. AU - Slouka, Z. AU - Chang, H. C. AU - Diamond, D. AU - Brabazon, D. PY - 2014 DA - 2014// TI - Advances in three-dimensional rapid prototyping of microfluidic devices for biological applications JO - Biomicrofluidics VL - 8 UR - https://doi.org/10.1063/1.4898632 DO - 10.1063/1.4898632 ID - O'Neill2014 ER - TY - JOUR AU - Li, Y. -. S. J. AU - Haga, J. H. AU - Chien, S. PY - 2005 DA - 2005// TI - Molecular basis of the effects of shear stress on vascular endothelial cells JO - J Biomech VL - 38 UR - https://doi.org/10.1016/j.jbiomech.2004.09.030 DO - 10.1016/j.jbiomech.2004.09.030 ID - Li2005 ER - TY - JOUR AU - Yan, Y. AU - Wang, X. AU - Pan, Y. AU - Liu, H. AU - Cheng, J. AU - Xiong, Z. AU - Lin, F. AU - Wu, R. AU - Zhang, R. AU - Lu, Q. PY - 2005 DA - 2005// TI - Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique JO - Biomaterials VL - 26 UR - https://doi.org/10.1016/j.biomaterials.2005.02.027 DO - 10.1016/j.biomaterials.2005.02.027 ID - Yan2005 ER - TY - STD TI - Kim JB. Three-dimensional tissue culture models in cancer biology. Semin Cancer Biol. Elsevier. 2005:365–77. ID - ref111 ER - TY - JOUR AU - Vargo-Gogola, T. AU - Rosen, J. M. PY - 2007 DA - 2007// TI - Modelling breast cancer: one size does not fit all JO - Nat Rev Cancer VL - 7 UR - https://doi.org/10.1038/nrc2193 DO - 10.1038/nrc2193 ID - Vargo-Gogola2007 ER - TY - JOUR AU - Chan, C. Y. AU - Huang, P. -. H. AU - Guo, F. AU - Ding, X. AU - Kapur, V. AU - Mai, J. D. AU - Yuen, P. K. AU - Huang, T. J. PY - 2013 DA - 2013// TI - Accelerating drug discovery via organs-on-chips JO - Lab Chip VL - 13 UR - https://doi.org/10.1039/c3lc90115g DO - 10.1039/c3lc90115g ID - Chan2013 ER - TY - JOUR AU - Chang, R. AU - Emami, K. AU - Wu, H. AU - Sun, W. PY - 2010 DA - 2010// TI - Biofabrication of a three-dimensional liver micro-organ as an in vitro drug metabolism model JO - Biofabrication VL - 2 UR - https://doi.org/10.1088/1758-5082/2/4/045004 DO - 10.1088/1758-5082/2/4/045004 ID - Chang2010 ER - TY - JOUR AU - Yao, R. AU - Zhang, R. AU - Yan, Y. AU - Wang, X. PY - 2009 DA - 2009// TI - In vitro angiogenesis of 3D tissue engineered adipose tissue JO - J Bioact Compat Polym VL - 24 UR - https://doi.org/10.1177/0883911508099367 DO - 10.1177/0883911508099367 ID - Yao2009 ER - TY - JOUR AU - Fedorovich, N. E. AU - De Wijn, J. R. AU - Verbout, A. J. AU - Alblas, J. AU - Dhert, W. J. PY - 2008 DA - 2008// TI - Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing JO - Tissue Eng A VL - 14 UR - https://doi.org/10.1089/ten.a.2007.0158 DO - 10.1089/ten.a.2007.0158 ID - Fedorovich2008 ER - TY - JOUR AU - Li, S. AU - Xiong, Z. AU - Wang, X. AU - Yan, Y. AU - Liu, H. AU - Zhang, R. PY - 2009 DA - 2009// TI - Direct fabrication of a hybrid cell/hydrogel construct by a double-nozzle assembling technology JO - J Bioact Compat Polym VL - 24 UR - https://doi.org/10.1177/0883911509104094 DO - 10.1177/0883911509104094 ID - Li2009 ER - TY - JOUR AU - Knowlton, S. AU - Yu, C. H. AU - Ersoy, F. AU - Emadi, S. AU - Khademhosseini, A. AU - Tasoglu, S. PY - 2016 DA - 2016// TI - 3D-printed microfluidic chips with patterned, cell-laden hydrogel constructs JO - Biofabrication VL - 8 UR - https://doi.org/10.1088/1758-5090/8/2/025019 DO - 10.1088/1758-5090/8/2/025019 ID - Knowlton2016 ER - TY - JOUR AU - Hamid, Q. AU - Wang, C. AU - Snyder, J. AU - Williams, S. AU - Liu, Y. AU - Sun, W. PY - 2015 DA - 2015// TI - Maskless fabrication of cell-laden microfluidic chips with localized surface functionalization for the co-culture of cancer cells JO - Biofabrication VL - 7 UR - https://doi.org/10.1088/1758-5090/7/1/015012 DO - 10.1088/1758-5090/7/1/015012 ID - Hamid2015 ER - TY - JOUR AU - Hansen, C. J. AU - Saksena, R. AU - Kolesky, D. B. AU - Vericella, J. J. AU - Kranz, S. J. AU - Muldowney, G. P. AU - Christensen, K. T. AU - Lewis, J. A. PY - 2013 DA - 2013// TI - High-throughput printing via microvascular multinozzle arrays JO - Adv Mater VL - 25 UR - https://doi.org/10.1002/adma.201203321 DO - 10.1002/adma.201203321 ID - Hansen2013 ER - TY - JOUR AU - Kolesky, D. B. AU - Truby, R. L. AU - Gladman, A. AU - Busbee, T. A. AU - Homan, K. A. AU - Lewis, J. A. PY - 2014 DA - 2014// TI - 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs JO - Adv Mater VL - 26 UR - https://doi.org/10.1002/adma.201305506 DO - 10.1002/adma.201305506 ID - Kolesky2014 ER - TY - JOUR AU - Lind, J. U. AU - Busbee, T. A. AU - Valentine, A. D. AU - Pasqualini, F. S. AU - Yuan, H. AU - Yadid, M. AU - Park, S. -. J. AU - Kotikian, A. AU - Nesmith, A. P. AU - Campbell, P. H. PY - 2017 DA - 2017// TI - Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing JO - Nat Mater VL - 16 UR - https://doi.org/10.1038/nmat4782 DO - 10.1038/nmat4782 ID - Lind2017 ER - TY - JOUR AU - Tasoglu, S. AU - Demirci, U. PY - 2013 DA - 2013// TI - Bioprinting for stem cell research JO - Trends Biotechnol VL - 31 UR - https://doi.org/10.1016/j.tibtech.2012.10.005 DO - 10.1016/j.tibtech.2012.10.005 ID - Tasoglu2013 ER - TY - JOUR AU - Chan, H. N. AU - Chen, Y. AU - Shu, Y. AU - Chen, Y. AU - Tian, Q. AU - Wu, H. PY - 2015 DA - 2015// TI - Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips JO - Microfluid Nanofluid VL - 19 UR - https://doi.org/10.1007/s10404-014-1542-4 DO - 10.1007/s10404-014-1542-4 ID - Chan2015 ER - TY - JOUR AU - He, Y. AU - Qiu, J. AU - Fu, J. AU - Zhang, J. AU - Ren, Y. AU - Liu, A. PY - 2015 DA - 2015// TI - Printing 3D microfluidic chips with a 3D sugar printer JO - Microfluid Nanofluid VL - 19 UR - https://doi.org/10.1007/s10404-015-1571-7 DO - 10.1007/s10404-015-1571-7 ID - He2015 ER - TY - JOUR AU - Parekh, D. P. AU - Ladd, C. AU - Panich, L. AU - Moussa, K. AU - Dickey, M. D. PY - 2016 DA - 2016// TI - 3D printing of liquid metals as fugitive inks for fabrication of 3D microfluidic channels JO - Lab Chip VL - 16 UR - https://doi.org/10.1039/C6LC00198J DO - 10.1039/C6LC00198J ID - Parekh2016 ER - TY - JOUR AU - Johnson, B. N. AU - Lancaster, K. Z. AU - Hogue, I. B. AU - Meng, F. AU - Kong, Y. L. AU - Enquist, L. W. AU - McAlpine, M. C. PY - 2016 DA - 2016// TI - 3D printed nervous system on a chip JO - Lab Chip VL - 16 UR - https://doi.org/10.1039/C5LC01270H DO - 10.1039/C5LC01270H ID - Johnson2016 ER - TY - JOUR AU - Lu, Y. AU - Shi, W. AU - Qin, J. AU - Lin, B. PY - 2009 DA - 2009// TI - Fabrication and characterization of paper-based microfluidics prepared in nitrocellulose membrane by wax printing JO - Anal Chem VL - 82 UR - https://doi.org/10.1021/ac9020193 DO - 10.1021/ac9020193 ID - Lu2009 ER - TY - JOUR AU - Shen, W. AU - Li, M. AU - Ye, C. AU - Jiang, L. AU - Song, Y. PY - 2012 DA - 2012// TI - Direct-writing colloidal photonic crystal microfluidic chips by inkjet printing for label-free protein detection JO - Lab Chip VL - 12 UR - https://doi.org/10.1039/c2lc40311k DO - 10.1039/c2lc40311k ID - Shen2012 ER - TY - JOUR AU - Park, C. AU - Lee, J. AU - Kim, Y. AU - Kim, J. AU - Lee, J. AU - Park, S. PY - 2017 DA - 2017// TI - 3D-printed microfluidic magnetic preconcentrator for the detection of bacterial pathogen using an ATP luminometer and antibody-conjugated magnetic nanoparticles JO - J Microbiol Methods VL - 132 UR - https://doi.org/10.1016/j.mimet.2016.12.001 DO - 10.1016/j.mimet.2016.12.001 ID - Park2017 ER - TY - JOUR AU - Zhang, B. AU - Montgomery, M. AU - Chamberlain, M. D. AU - Ogawa, S. AU - Korolj, A. AU - Pahnke, A. AU - Wells, L. A. AU - Massé, S. AU - Kim, J. AU - Reis, L. PY - 2016 DA - 2016// TI - Biodegradable scaffold with built-in vasculature for organ-on-a-chip engineering and direct surgical anastomosis JO - Nat Mater VL - 15 UR - https://doi.org/10.1038/nmat4570 DO - 10.1038/nmat4570 ID - Zhang2016 ER -